SOILS AND MATERIALS – INVESTING IN NEW MATERIALS, PRODUCTS AND PROCESSES (SESSION)

SOLS ET MATÉRIAUX : INVESTIR DANS LES MATÉRIAUX, PRODUITS ET PROCÉDÉS NOUVEAUX (SÉANCE)

Chair / Présidente : Carol MacQuarrie , Assistant Director, Materials and Research, Design Branch, Department of Transportation of New Brunswick, Fredericton

USE OF BOTTOM ASH AS A SUBBASE INSULATION LAYER – Bert Pulles , Senior Project Engineer, EBA Engineering Consultants Ltd., Edmonton

SHORT TERM PERFORMANCE OF AN INNOVATIVE COLD IN-PLACE RECYCLING TECHNOLOGY IN ONTARIO – Becca Lane , Senior Pavement Design Engineer, and Tom Kazmierowski , Manager, Pavements and Foundations Section, Ontario Ministry of Transportation, Downsview

SEAL COAT SYSTEMS IN CANADA: PERFORMANCE AND PRACTICE – Keith Davidson , McAsphalt Industries Ltd., Toronto; Gary Houston , McAsphalt Industries Ltd., Regina; Jean-Martin Croteau , Technical Director, and Peter Linton , Miller Paving Limited, Gormley, ON

ACCELERATED LABORATORY EVALUATION OF JOINT SEALANTS UNDER CYCLIC LOADS – Tanya Worms , UMA Engineering Ltd., Winnipeg; Ahmed Shalaby , Associate Professor, Department of Civil Engineering, University of Manitoba, Winnipeg; Leonnie Kavanagh , Surfacing Materials Engineer, Manitoba Transportation and Government Services, Winnipeg

REVIEW OF THE NEW MECHANISTIC-EMPIRICAL PAVEMENT DESIGN GUIDE: A MATERIAL CHARACTERIZATION PERSPECTIVE – Morched Zeghal , Research Officer, and Elhussein Mohamed , Senior Research Officer, National Research Council Canada, Ottawa; Yassin Adam, M.A.Sc., and Osman Ali , M.A.Sc., Carleton University, Ottawa

DESIGN CRITERIA FOR INTERLOCKING CONCRETE PAVEMENT – Pascale Pierre , Engineer, Guy Doré , Professor, and Joseph Tsafack , Ph.D. Student, Department of Civil Engineering, Laval University, Quebec City